Skip to content
-
-
- Fittings
-
$9.95
- Russell Performance -6 AN Anodized Blue Tube Seal Hose End For 5/16in Fuel Hose #623260. Priced and sold individually.
- Add to cart
-
-
- Fittings
-
$9.95
- Russell Performance -6 AN Chrome Tube Seal Hose End For 5/16in Fuel Hose #622260.
- Add to cart
-
-
- Fittings
-
$9.95
- Russell Performance -6 AN Red Tube Seal Hose End For 5/16in Fuel Hose #620260. Priced and sold individually.
- Add to cart
-
-
- Gauges & Sensors
-
$25.95
- Russell Performance - 0-15 psi Fuel Pressure Gauge (Non-Liquid Filled) #650350 Engineered for the serious street enthusiast, these gauges guarantee precise fuel pressure settings from 0 to 100 psi. Each comes with an easy to read face. These...
- Add to cart
-
-
- Filters
-
$19.95
- Russell Performance Chrome Street Fuel Filter (3in Length 1-1/8in diameter 5/16in inlet/outlet) #645060. Made of billet aluminum. Sintered-bronze 40 micron element. Designed for carbureted engines.
- Add to cart
-
-
- Carburetor, Filter, Filters
-
$47.95
- Russell Performance Fuel Filter Black Anodized (3in Length 1-1/4in dia. -6AN male inlet/outlet) #650133. Designed for carbureted engines only.
- Add to cart
-
-
- Brakes
-
$18.95
- Russell Performance Speed Bleeder 7mm X 1.0 Pair #639570. 34mm Length. Bleeding your brake or clutch line has never been easier or simpler!
- Add to cart
-
-
Sale!
- Electronics
-
$20.00 Original price was: $20.00.$16.95Current price is: $16.95.
- Mazda RX-7 Turbo 1993-1996 Greddy Turbo Timer Harness #15940003. #TT14-33. Allows the turbo timer harness to plug into the factory ignition wiring harness.
- Add to cart
-
-
Sale!
- Fittings
-
$30.00 Original price was: $30.00.$28.00Current price is: $28.00.
- SARD Fuel Rail Adapter - SRA01 #69014 - Nissan, Subaru, Mazda. Fits Skyline - RB26DETT, Silvia, 180SX, SR20DET, Impreza - EJ20G, EJ20K, EJ205, EJ207, Legacy - EJ20G, EJ20H, EJ20R, EJ206, EJ208, RX-7 13B-REW, This fitting bolts to the stock fuel rail...
- Add to cart
-
-
-
Sale!
- Fittings
-
$30.00 Original price was: $30.00.$28.00Current price is: $28.00.
- SARD Fuel Rail Adapter - SRA03 #69016 - Toyota. Mark II JZX90 1JZ-GTE, Celica ST205 3S-GTE. This fitting bolts to the stock fuel rail allowing for the use of nipple or AN fitting out to the SARD fuel pressure regulator. Additional AN or Nipple fitting sold separately. Made in Japan.
- Add to cart
-
-
- Fittings
-
$30.00
- SARD Fuel Rail Adapter - SRA04 #69017 - Honda. Civic EK9 B16B, CRX EF8 B16A, Accord CD8 H22A. This fitting bolts to the stock fuel rail allowing for the use of nipple or AN fitting out to the SARD fuel pressure regulator.
- Add to cart
-
-
Sale!
- Fittings
-
$30.00 Original price was: $30.00.$26.00Current price is: $26.00.
- SARD Aluminum Fuel Rail Adapter Fitting - SRA05 #69018 - Mitsubishi. Lancer Evolution CN9A, CP9A - 4G63. This fitting bolts to the stock fuel rail allowing for the use of nipple or AN fitting out to the SARD fuel pressure regulator. Additional AN or Nipple fitting sold separately. Made in Japan.
- Add to cart
-
-
- Engine Components, Fuel Pressure Regulator
-
$210.00
- SARD Sport Fuel Pressure Regulator with -6AN fittings. #69011. Two -6AN fittings included. Universal. Fuel rail adapter fittings and meter also available. One of the Best Fuel Pressure Regulators on the market! Made in Japan.
- Add to cart
-
-
- Engine Components, Fuel Pressure Regulator
-
$200.00
- SARD Sport Fuel Pressure Regulator with 8mm barbed fittings #69010. Two 8mm Barbed Fittings included. Universal. Fuel rail adapter fittings and meter also available. One of the Best Fuel Pressure Regulators on the market! Made in Japan.
- Add to cart
-
-
Sale!
- Fittings
-
$38.00 Original price was: $38.00.$34.00Current price is: $34.00.
- SARD SRB01 - 1/8 NPT to AN-6 Fitting 90 Elbow Fitting. Made in Japan. #69020. Used in combination with SARD regulator fittings and regulator adapters.
- Add to cart
-
-
Sale!
- Fittings
-
$13.00 Original price was: $13.00.$10.00Current price is: $10.00.
- SARD SRB04 - 1/8 NPT to AN-6 Fitting Straight #69013 Made in Japan. Priced and Sold Individually. This is a standard universal adapter for use on installation of the SARD Fuel Pressure Regulator. May be used for other purposes.
- Add to cart
-
-
Sale!
- Fittings
-
$11.00 Original price was: $11.00.$9.00Current price is: $9.00.
- SARD SRB04 - 8mm barbed to 1/8 NPT Straight fitting #69012. Made in Japan. This is a standard universal adapter for use on SARD Fuel Pressure Regulator.
- Add to cart
-
-
Sale!
- Fittings
-
$13.00 Original price was: $13.00.$11.00Current price is: $11.00.
- SARD SRB05 - 1/8 NPT to AN-8 Fitting Straight. Aluminum. Blue. Made in Japan. #69023. Priced and Sold Individually.
- Add to cart
-
-
Sale!
- Roll Bars & Roll Cages, Safety
-
$895.95 Original price was: $895.95.$719.95Current price is: $719.95.
- Scion FRS/Subaru BRZ 2012-2020 - Autopower 4pt Race Roll Bar.#60783. Made in the USA! Material - DOM Steel. 1.75 inch Diameter. 1/20th inch thick. SCCA Approved. Direct fit, welding required. Black finish. Autopower bolt-in roll bars are...
- Add to cart
-
-
Sale!
- Chassis Brace, Suspension
-
$238.00 Original price was: $238.00.$179.95Current price is: $179.95.
- Scion FRS ZN6/Subaru BRZ ZC6 2013-15 Tanabe Front Under Brace. 4pt brace. #TUB166F. Often overlooked, especially on vehicles that are reaching higher levels of modification, is the importance of reinforcing the chassis. All vehicles experience...
- Add to cart
-
-
-
Sale!
- Engine Bay, Strut Tower Brace, Suspension
-
$220.00 Original price was: $220.00.$198.00Current price is: $198.00.
- Scion FRS - Subaru BRZ - Toyota 86 - Cusco Upper Front Type OS Strut Bar. #965 540A. The most popular of the Cusco bars is the Type OS
- Add to cart
-
-
Sale!
- Filters, Performance
-
$260.00 Original price was: $260.00.$199.95Current price is: $199.95.
- Scion TC 2004-2006 - Zero 1000 Power Chamber. Carbon Fiber/Aluminum Intake. #U-102-S0050. Discontinued, Limited to stock on hand. Off Highway Use. Not CARB exempt.
- Add to cart
-
-
Sale!
- Engine Bay, Specials & Clearance, Strut Tower Brace, Suspension
-
$220.00 Original price was: $220.00.$186.95Current price is: $186.95.
- Scion tC 2011-2015 2.5L Cusco OS Type Upper Front Strut Bar. #960 540 A Maintain the static suspension geometry between the front strut towers for optimal suspension efficiency. Upon hard cornering, chassis flex throws off the vehicle's intended...
- Add to cart
-
-
- Bolt & Screw, Carburetor
-
$0.75
- Screw w/split washer - For Float Chamber Cover . Fits Mikuni 40PHH 44PHH Performance Carburetor. Item #75 in exploded view. #CW2=0525-RS. New, smaller head diameter 8.75mm. Alternative Replacement Part for Genuine Mikuni #CW2=0525 (8.75mm head...
- Add to cart
-
-
- Bolt & Screw, Carburetor
-
$1.28
- Screw w/spring washer. Fits both Mikuni 40PHH and 44PHH Performance Carburetors. Item #10 in exploded view. #CW2=0512-RS. Small head. This is a Replacement Alternative for the Genuine Mikuni #CW2=0512. Sold individually. Also fits some Mikuni /...
- Add to cart
-
-
- Bolt & Screw, Carburetor
-
$0.69
- Screw w/washer, Pump Cover. Fits 40PHH and 44PHH Mikuni / Solex Carburetors. Item #50 in exploded view. #CW2=0416-R. Replacement alternative for Mikuni CW2=0416. Sold individually. Authorized Mikuni Distributor Also fits some Mikuni / Solex PHH...
- Add to cart
-
- Bolt & Screw, Carburetor
-
$0.79
- Screw w/washer, Pump Cover. Fits Mikuni 40PHH and 44PHH Mikuni / Solex Carburetors. Item #50 in exploded view. #CW2=0416-RS. Replacement alternative for Mikuni CW2=0416. Sold individually. Authorized Mikuni Distributor Also fits some Mikuni / Solex PHH...
- Add to cart
-
-
- Bolt & Screw, Carburetor
-
$0.96
- Screw w/washer. Pump Cover. Fits Mikuni 44PHH Performance Carburetor. Item #49 in exploded view. Small Head. #CW2=0435-RS. Zinc Chromate finish. Replacement alternative for CW2=0435 and CW2=0435-R. Mikuni has discontinued the original CW2=0435...
- Add to cart
-
-
- Bolt & Screw, Carburetor
-
$0.91
- Screw w/washer. Jet Chamber Cover. Mikuni 40 PHH Performance Carburetor. #N115.106-RS. New, smaller diameter head (8.75mm). Replaces item #1 and #2 in exploded view. Zinc Chromate finish. Replacement Alternative for Discontinued Mikuni screw...
- Add to cart
-
-
- Bolt & Screw, Carburetor
-
$1.26
- Screw w/washer. Jet Chamber Cover. Mikuni 44 PHH Performance Carburetor. #N115.050-RS. New, smaller diameter head (8.75mm). Replaces item #1 and #2 in exploded view. Zinc Chromate finish. Replacement for Discontinued Mikuni screw #N115 .050(#1)...
- Add to cart
-
-
- 5x114.3, Single Wheels
-
$499.95
- Sebring ITC SD/Spider Design 19x9.0 5x114.3 +30 DC/Blk - Single. Display. Made by Rays Engineering. Made in Japan. Only One wheel available, No Sets. Discontinued application, limited to stock on hand. Also can be used as a Nice Full Size Spare,...
- Add to cart
-
- 5x100, Single Wheels, Specials & Clearance
-
$149.95
- Sebring ITC Sport 17x7.0 5x100 +28 Silver Wheel - Blem Single. Surface scratches on lip. Made by Rays Engineering. Made in Japan. One piece cast construction. Discontinued application, limited to stock on hand. Does not include center cap....
- Add to cart
-
- 5x114.3, Single Wheels, Specials & Clearance
-
$149.95
- Sebring ITC Sport 17x7.0 5x114.3 +35 DC/Blk Blem - S ingle. Only 1 Available. Made by Rays Engineering. Made in Japan. One piece cast construction. Discontinued application, limited to stock on hand. Picture may not be actual wheel. Discontinued...
- Add to cart
-
-
Sale!
- 5x114.3, Single Wheels
-
$390.00 Original price was: $390.00.$312.00Current price is: $312.00.
- Sebring ITC-S 18x7.5 5x114.3 +42 Silver. No center cap. Discontinued wheel. Only One wheel available.
- Add to cart
-
-
Sale!
- 4x100, 5x100, Single Wheels
-
$390.00 Original price was: $390.00.$330.00Current price is: $330.00.
- Sebring ITC-X 17x7.0 4/5x100 +42 Silver. Discontinued wheel. Only One wheel available. Includes Center cap.
- Add to cart
-
- 5x112, 5x120, Single Wheels
-
$449.95
- Sebring ITC-X 18x8.5 +40 5x112 / 5x120 Silver. Single. Made by Rays Engineering. Made in Japan. Discontinued wheel, Limited to stock on hand. Authorized Rays Engineering Wheels Distributor For more Rays Engineering Wheels available, please also visit www.upgrademotoring.com Thank you!
- Add to cart
-
-
- Bolt & Screw, Carburetor
-
$1.26
- Set Screw, Venturi, Large - Mikuni 40PHH Performance Carburetor. Item #47. #N107.173-R 16mm Replacement Alternative. Stainless Steel - Allen Head.
- Add to cart
-
-
- Bolt & Screw, Carburetor
-
$1.30
- Set Screw, Venturi, Small - Mikuni 40PHH/44PHH Performance Carburetor. 20mm #N107.174-R - Item #48. Replacement Alternative. Stainless Steel - Allen Head.
- Add to cart
-
- 12x1.5mm, Lug Nuts, Wheel Accessories
-
$3.95
- External Spline Shanked Conical Seat 12x1.25 Chrome Closed End Lug Nuts. #LUGSHKSPL12x125. Lugs are priced and sold individually. Specifications: ~20mm wide at base - Shank width ~15.5mm - Shank length ~7.5mm - ~43mm tall.
- Add to cart
-
-
- 12x1.5mm, Lug Nuts, Wheel Accessories
-
$3.95
- External Spline Shanked Conical Seat 12x1.50 Chrome Closed End Lug Nuts. #LUGSHKSPL12x150. Lugs are priced and sold individually. Specifications: ~20mm wide at base - Shank width ~15.5mm - Shank length ~7.5mm - ~43mm tall.
- Add to cart
-
-
- 1/2x20, Lug Nuts, Wheel Accessories
-
$3.95
- Shanked Tuner External Spline Chrome Lug Nuts 1/2x20. Closed End. Can be used on the Volk Racing GTC, Volk Racing AV3 wheels and more. Lugs are priced individually. ~20mm wide at base - Shank width ~15.5mm - Shank length ~7.5mm - ~43mm tall....
- Add to cart
-
- 7/16-20, Lug Nuts, Wheel Accessories
-
$3.95
- Shanked Tuner External Spline Chrome Lug Nuts 7/16in-20 Thread. Closed End. Lugs are priced individually. ~20mm wide at base - Shank width ~15.5mm - Shank length ~7.5mm - ~43mm...
- Add to cart
-
-
-
-
-
- Lighting, Miniature Bulb
-
$10.95
- Soei - Euro Interior Dome Light Bulb - 12v 10watt Green Each #SE-520G. 10x36mm. Made in Japan. Discontinued. Limited to stock on hand.
- Add to cart
-
-
- Lighting, Miniature Bulb
-
$14.95
- Soei - Interior Dome Light Bulb - 12v 10watt Blue (Purple) Each #SE-525B. -10x31mm. Made in Japan. Discontinued. Limited to stock on hand.
- Add to cart
-
-
- Lighting, Miniature Bulb
-
$10.95
- Soei - Interior Dome Light Bulb - 12v 10watt Green Each #SE-525G. 10x31mm. Made in Japan. Discontinued. Limited to stock on hand.
- Add to cart
-
-
- Lighting, Miniature Bulb
-
$14.95
- Soei - Reverse/Back up Light Bulb - 12v 10watt Blue/Purple Pair #SE-200B. Made in Japan. Discontinued. Limited to stock on hand.
- Add to cart
-
-
- Lighting, Miniature Bulb
-
$14.95
- Soei - Reverse/Back up Light Bulb - 12v 10watt Green Pair #SE-200G. Made in Japan. Discontinued. Limited to stock on hand.
- Add to cart
-
-
-
-
-
- Hub Adapter, Interior
-
$105.00
- Sparco Hub Adapter - Honda Civic/CRX 88-2/92 #01502092. To properly install a Sparco Steering Wheel, use a Sparco Hub Adapter. Steering wheel hub adapters are required to install 6 bolt Sparco wheels into your vehicle.
- Add to cart
-
-
- Key Fob, Merchandise
-
$8.95
- Sparco Key Fob Seat #099071SEAT. Sold Individually. Pictures show all four different Sparco Key Fobs available. Sold Individually. This listing is for Only the Seat Key Fob.
- Add to cart
-
-
-
Sale!
- Interior, Pedals
-
$75.00 Original price was: $75.00.$69.95Current price is: $69.95.
- Sparco Pedal Set Settanta Short Silver #037879IT01.
- Add to cart
-
-
-
- Merchandise, T-Shirt
-
$35.00
- Sparco T-Shirt - Tach Black Large #01600NR3L. Ultra-soft, 100% pre-shrunk Tri-Blend material T-shirt graphic printed on front and back. Made from tri-blend: 60% Poly, 25% Rayon, 15% Ringspun Cotton
- Add to cart
-
-
Sale!
- Alignment
-
$195.16 Original price was: $195.16.$159.95Current price is: $159.95.
- SPC 1-1/8" HOLE PUNCH - This tool is used to cut holes for the installation of #83100, 83110 and 83115 camber kits. A must to ensure a good, round hole for the kits shown.
- Add to cart
-
-
- Alignment
-
$136.06
- SPC Adjustable +3.0 Camber Upper Ball Joint #67360. Each. Honda Acura. Priced and Sold Individually. Acura: Vigor 1992 - 1994 Honda: Prelude 1992 - 2001
- Add to cart
-
-
Sale!
- Alignment
-
$19.25 Original price was: $19.25.$14.44Current price is: $14.44.
- SPC Bolt Set M10X1.25X30 (SET OF 4 BOLTS) #73415
- Add to cart
-
-
Sale!
- Alignment, Suspension
-
$51.27 Original price was: $51.27.$38.45Current price is: $38.45.
- SPC Camber/Toe Bolt Kit Rear. Nissan 350Z #72055. These cams (set of 2) replace the OE camber and toe adjustment cams and provide additional camber and toe changes. Rear Adjustment range: Camber ±3.00 degree Toe ±3.00 degree One kit required per wheel.
- Add to cart
-
-
- Alignment
-
$15.82
- SPC Dual Angle Shim. Rear. Acura, Audi, Buick, Cadillac, Chevrolet, Chrysler, Dodge, Ford, Mercury, Nissan, Olds, Plymouth, Pontiac, Saturn. Rear Adjustment range: Camber -1.50
- Add to cart
-
-
- Alignment
-
$28.73
- SPC EZ Cam XR 14mm Strut Bolts #81260. EZ Cams make non-adjustable two-bolt struts adjustable up to +/- 1.75° camber change.
- Add to cart
-
-
- Alignment
-
$64.19
- SPC Front Camber Kit #82120 - This cam bolt kit changes camber up to 2-1/2 degree. It includes an adjusting plate to make the camber adjustment possible.
- Add to cart
-
-
Sale!
- Alignment
-
$130.73 Original price was: $130.73.$104.91Current price is: $104.91.
- SPC Camber Kit - Datsun: 240Z, 260Z, 280Z, 810, Nissan: 200SX, 280ZX, 300ZX, Maxima. Front Adjustment range: Camber -.75 degree to +.75 degree. One kit required per axle.
- Add to cart
-
-
- Alignment
-
$147.00
- SPC Front Camber Kit #87590 - Chrysler: 1995 - 00 Sebring Coupe, Dodge: 1995 - 00 Avenger, Eagle: 1995 - 98 Talon, Mitsubishi: 1995 - 99 Eclipse, 1994 - 98 Galant. Front +1.75 degrees to +3.25 degrees camber. One kit required per wheel.
- Add to cart
-
- Alignment
-
$41.02
- SPC Rear Camber Kit #84580 - Acura: 1990 - 01 Integra, Honda: 1988 - 00 Civic, 1988 - 92 CRX, 1992 - 97 Del Sol. Rear Camber correction up to .75 degrees. One kit required per wheel. Discontinued.
- Add to cart
-
-
Sale!
- Alignment, Suspension
-
$106.80 Original price was: $106.80.$89.95Current price is: $89.95.
- Sprint Suspension - Accord 1994-1997 Rear Camber Kit +/-3.0 degree #XC1007R. One kit required per corner.
- Add to cart
-
-
- Center Caps/Lug Covers, Wheel Accessories
-
$40.00
- SSR Wheel - "Sports Inspired" Center Cap - Black B-Type Flat #PARTS244BL - For SPX, SP4, SP4R, MS3, MS3-R, GT-03, GT-04, GT0-4S Wheels with PCD 108-130. Tab Style. Priced and sold individually.
- Add to cart
-
-
-
-
- Center Caps/Lug Covers, Wheel Accessories
-
$35.00
- SSR Wheels Center Cap - SSR MK-II 68.3mm (13", 14" PCD 100-108, 15" PCD 100-101.65) Picture #5. PARTS080. Priced individually. Please measure your cap hole diameter for confirmation prior to ordering.
- Add to cart
-
-
-
Sale!
- 6x139.7, Wheels
-
$490.00 Original price was: $490.00.$441.00Current price is: $441.00.
- SSR Devide SP1 Trail 17x8.5 -10 6x139.7 Flat Black Wheel. #D317850-1006OMB. Priced and sold individually. Image may not be actual fitment. SP1 Trail is offered in two offsets. ±0 or -10.
- Add to cart
-
-
Sale!
- 6x139.7, Wheels
-
$490.00 Original price was: $490.00.$441.00Current price is: $441.00.
- SSR Devide SP1 Trail 17x8.5 -10 6x139.7 Flat Bronze Wheel. #D317850-1006OMC. Priced and sold individually. Image may not be actual fitment. SP1 Trail is offered in two offsets. ±0 or -10.
- Add to cart
-
-
Sale!
- 6x139.7, Wheels
-
$490.00 Original price was: $490.00.$441.00Current price is: $441.00.
- SSR Devide SP1 Trail 17x8.5 -10 6x139.7 Flat Gunmetal Wheel. #D317850-1006OMG. Priced and sold individually. Image may not be actual fitment. SP1 Trail is offered in two offsets. ±0 or -10.
- Add to cart
-
-
Sale!
- 6x139.7, Wheels
-
$490.00 Original price was: $490.00.$441.00Current price is: $441.00.
- SSR Devide SP1 Trail 17x8.5 -10 6x139.7 Silver Wheel. #D317850-1006OS0 Priced and sold individually. Image may not be actual fitment. SP1 Trail is offered in two offsets. ±0 or -10.
- Add to cart
-
-
Sale!
- 6x139.7, Wheels
-
$490.00 Original price was: $490.00.$441.00Current price is: $441.00.
- SSR Devide SP1 Trail 17x8.5 +0 6x139.7 Flat Black Wheel. #D317850-0006OMB. Priced and sold individually. Image may not be actual fitment. SP1 Trail is offered in two offsets. ±0 or -10.
- Add to cart
-
-
Sale!
- 6x139.7, Wheels
-
$490.00 Original price was: $490.00.$441.00Current price is: $441.00.
- SSR Devide SP1 Trail 17x8.5 +0 6x139.7 Flat Bronze Wheel. #D317850-0006OMC. Priced and sold individually. Image may not be actual fitment. SP1 Trail is offered in two offsets. ±0 or -10.
- Add to cart
-
-
Sale!
- 6x139.7, Wheels
-
$490.00 Original price was: $490.00.$441.00Current price is: $441.00.
- SSR Devide SP1 Trail 17x8.5 +0 6x139.7 Flat Gunmetal Wheel. #D317850-0006OMG. Priced and sold individually. Image may not be actual fitment. SP1 Trail is offered in two offsets. ±0 or -10.
- Add to cart
-
-
Sale!
- 6x139.7, Wheels
-
$490.00 Original price was: $490.00.$441.00Current price is: $441.00.
- SSR Devide SP1 Trail 17x8.5 +0 6x139.7 Silver Wheel. #D317850-0006OS0 Priced and sold individually. Image may not be actual fitment. SP1 Trail is offered in two offsets. ±0 or -10.
- Add to cart
-
-
- 4x114.3, Wheels
-
$749.95
- SSR Formula Mesh 15x8.0 4x114.3 -2 Gold 3pc Wheel. New 2024 Revival Limited Edition Model. Outer Lip size 83mm! Three piece design wheel. Step Rim. Limited to stock on hand!
- Add to cart
-
-
- Center Caps/Lug Covers, Wheel Accessories
-
$40.00
- SSR Formula Mesh Revival Wheel Center Cap - 77.0mm PCD 108~114.3. Made in Japan. Priced and sold individually. This cap Only fits the new SSR Formula Mesh Revival Wheels with PCD between 108 to 114.3.
- Add to cart
-
-
- Valve Stems & Caps, Wheel Accessories
-
$39.95
- SSR GT Aluminum Valve Stem Caps w/ MAGNET Set (4 Pcs.) Black. #1SB2DD100BL. These new SSR valve stem caps are Magnetic! After removing them, just stick them to your fender or jack. Nylon threads are used to reduce corrosion and seized caps. Sold in a pack of four caps.
- Add to cart
-
-
- 60.1mm ID, 72.2mm OD, Hub Centric Rings
-
$24.95
- SSR Wheels Hub Centric Rings - 72.2mm-60.1mm Aluminum - #PARTS221 - Sold in Pairs. Nissan. Fits aftermarket wheels with 72.2mm center bore to 60.1mm hub bore. Picture may not be actual application. Authorized SSR Wheel Distributor
- Add to cart
-
-
- 70.1mm ID, 73mm OD, Hub Centric Rings
-
$9.95
- SSR Hub Centric Rings - 73mm-70.1mm - Pair. Fits Honda, Acura. SSR Hub Centric Rings are made of a high grade plastic with a temperature range of -40 to +180C. Normal Polycarbonate Hub Ring material has a temperature range of -40 to +125C. Reduce...
- Add to cart
-
-
-
-
Sale!
- 5x112, Single Wheels
-
$940.00 Original price was: $940.00.$549.95Current price is: $549.95.
- SSR SP3 19x8.5 Silver 5x112 +37HP. Made to order. Special order from Japan. No cancellations on special orders. Average lead time is 3.5 - 4 months. Hub Centric Rings included with purchase of set of four wheels. Please specify Year, Make and Model Vehicle.
- Add to cart
-
-
- 12x1.5mm, Lug Nuts, Wheel Accessories
-
$6.50
- SSR Speed Star MK Lug Nut 12x1.50mm with Washer. For wheels with PCD 100. #PARTS038C. Mag style lug nut with washer. SSR MK-I (all), SSR MK-II (13/14 inch), SSR MK-II (13/14inch) - 12x1.50mm PCD 100. Special order from Japan. Priced per Lug nut and washer.
- Add to cart
-
-
- 12x1.5mm, Lug Nuts, Wheel Accessories
-
$6.50
- SSR Speed Star MK Lug Nut 12x1.50mm with Washer. For wheels with PCD 114.3. #PARTS038G. Mag style lug nut with washer. SSR MK-I (all), SSR MK-II (13/14 inch), SSR MK-II (13/14inch) - 12x1.50mm PCD 114.3. Priced per Lug nut and washer. #PARTS038G.
- Add to cart
-
-
Sale!
- 4x114.3, Wheels
-
$735.00 Original price was: $735.00.$661.50Current price is: $661.50.
- SSR Speed Star MK-II 15x8.5 4x114.3 +6 (C Disk) 81mm Lip Orange. Three Piece Construction. Made in Japan.
- Add to cart
-
-
- Center Caps/Lug Covers, Wheel Accessories
-
$85.00
- SSR Type C Large Aluminum Center Cap - No Logo - #COMPCAPLG-NO- For old style Type C wheels sold by Tire Rack. Sold individually. Also fits SSR GT2 wheel. Fits most 4x114.3, 5x114.3 and 5x120* PCD's. Overall diameter is ~80.75mm. O-ring diameter...
- Add to cart
-
-
Sale!
- 5x112, Single Wheels
-
$590.00 Original price was: $590.00.$524.95Current price is: $524.95.
- SSR Type F Euro 18x8.5 5x112 +32 MBK Wheel. Matte Black. Single. Speed Star Racing. Discontinued. Limited to stock on hand. No sets available.
- Add to cart
-
-
- Valve Stems & Caps, Wheel Accessories
-
$25.00
- SSR Wheels Valve Stem #PARTS013 - Fits SSR - GTF01, GTV01, GTV02, GTV03, Type-F, *Type-C, *Type-C RS, *Type-C Euro. *Fits most applications. Straight Black/Aluminum. Includes SSR Logo cap. Overall height 42mm tall. Bottom threaded area width ~8mm.
- Add to cart
-
-
- Valve Stems & Caps, Wheel Accessories
-
$15.00
- SSR Wheels Valve Stem Straight SVI-3 #PARTS010 - Fits: MK-I (13", 14", 15"), MK-II, MK-III, Type-F, Type-C, Type-C RS, Type-C Euro, most Formula Mesh. Overall length ~40mm tall. Bottom threaded area width ~8mm
- Add to cart
