Tanabe Sustec Pro S-S *

Sustec Pro S-S
Delivering broad performance for the track to the streets, Sustec Pro S-S allows drivers to fine tune height, dampening and rebound based on track conditions and driver preference. Helper Springs eliminate pre-load of the main spring, which maximizes ride comfort and rebound stability.

4-way front adjustment, as well as 8-way rear adjustment allows drivers to fine tune dampening and rebound tunable to any track condition and driver preference. Front adjustments are located on top of the stock shaft, while rear adjustments are placed at the bottom of the shock case, offering easy access for quick suspension adjustments.

4-way front adjustment
8-way rear adjustment (4-way on certain applications)

 

Solid Pillow Ball Upper Mounts (applicable on certain systems)
Camber plates allow for easy adjustment of the suspension's geometry and have durable NMB pillow ball construction for solid response.
*Permits the use of the stock upper mounts.
*Upper mounts not available for certain applications but can be purchased separately.

 

Helper Springs
Eliminates pre-load of the main spring, which maximizes ride comfort and rebound stability.

 

Extreme Short Stroke / Short Case
Allows ride height to be lowered dramatically by 60~100mm (2 3/8~4in), without compromising stroke travel and ride comfort.

 

Sustec PRO210 Series Competition Spec Springs
Tanabe's own PRO210 Series Springs have superior strength and durability that is achieved through our state-of-the-art manufacturing process. Constructed with our linear SAE9254 Cold Wound springs with a tensile strength of 2100N/mm, this allows the coil-overs to have a direct, firm response. *For the professional suspension tuner, different spring rate sets are available for special suspension tuning.

 

Super Heavy Duty PRO210 Series Spring
Tanabe's own PRO210 Series Springs have superior strength and durability that is achieved through our state-of-the-art manufacturing process. Constructed with our linear SAE9254 Cold Wound springs with a tensile strength of 2100N/mm, this allows the coil-overs to have a direct, firm response.

 

Spring Seat & Lock Nut
Lightweight forged aluminum Spring Seat and Lock Nut ensures superior longevity and strength. Spanner wrenches are included for easy adjustment.

 

Double-cylinder Low Pressure Gas Design
Additional rebound stability and smoothness characteristics are achieved with this track proven design. Unlike other dual-tube designs, Tanabe has developed a dual-tube coilover that retains the ride comfort of monotube coilover suspension kits.

 

Model Year Spring Rates
F/R		 Height Adj.
F/R*		 Part # MSRP
Acura
Integra RS/LS/GS/GSR 94-01 6.0 / 4.0 -1/4~-2 3/4in / -1/4~-2 3/4in TSS002 $1,116.00
Integra Type R 97-01 6.0 / 4.0 +1/4~-2in / +1/4~-1 3/4in TSS041 $1,116.00
RSX Non Type S (DC5) 02- 8.0 / 8.0 -1/4~-2in / +1/2~-2in TSS046 $1,395.00
RSX Type S (DC5) 02- 8.0 / 8.0 -1/4~-2in / +1/2~-2in TSS046 $1,395.00
Honda
Accord 2DR/4DR (CD) 94-97 6.0 / 4.0 -1/4~-3in / ±0~-3 1/4in TSS009 $1,116.00
Accord 4Cyl  98-02 8.0 / 4.0 -1/4~-2 1/2in / +1/4~-2in TSS023 $1,116.00
Accord V6  98-02 8.0 / 4.0 -1/4~-2 1/2in / +1/4~-2in TSS023 $1,116.00
Civic Coupe/Sedan 92-00 6.0 / 4.0 -1/4~-2 3/4in / +3/4~-2in TSS002 $1,116.00
Civic Hatchback 92-00 6.0 / 4.0 -1/4~-2 3/4in / +3/4~-2in TSS002 $1,116.00
Civic SI Hatchback (EP) 02- 6.0 / 8.0 -3/4~-2 1/2in / +1/4~-2 3/4in TSS049 TBA
Prelude (BB1/4) 92-96 8.0 / 4.0 -1/4~-2 3/4in / -3/4~-2 3/4in TSS008 $1,209.00
Prelude 97-02 8.0 / 4.0 -1/4~-2 3/4in / -3/4~-2 3/4in TSS008 $1,395.00
Prelude SH 97-02 8.0 / 4.0 -1/4~-2 3/4in / -3/4~-2 3/4in TSS008 $1,395.00
Lexus
GS300/400  (JZS161) 98- - / - - / -   TBA
IS300 (JCE10L) 00- 10.0 / 8.0 +1/4~-2 1/4in / +3/4~-2 1/4in TSS038 $1,209.00
Mazda
Miata (NA6(8)C) 90-98 6.0 / 4.0 +1/4~-2in / +1/4~-2 1/4in TSS016P $1,488.00
RX-7 (FD3S) 93-97 8.0 / 6.0 +1/4~-2in / -1/4~-2 1/4in TSS013P $1,534.50
RX-8  04- - / - - / - TSS097 TBA
Mitsubishi
Eclipse RS/GS/GST/GSX 95-99 6.0 / 4.0 +3/4~-1 1/4 / +1/4~-1 3/4 TSS005 $1,116.00
Lancer Evo5/6 (CP9A) 00-01 8.0 / 6.0 -1/4~-2 1/4in / +1~-1in TSS069 $1,302.00
Lancer EVO8 (CT9A) 03- 8.0 / 6.0 -1/4~-2 1/4in / +1/4~-2in TSS072 $1,302.00
Nissan
240SX (S13) 89-94 8.0 / 6.0 -1/2~-2 1/2in / -1/2~-2 1/2in TSS070 $1,302.00
240SX (S14) 95-98 6.0 / 4.0 -1/4~-2 1/2in / ±0~-1 1/2in TSS011 $1,302.00
350Z (Z33) 03- - / - - / - TSS063 TBA
Skyline (BNR34) 99-01 10.0 / 8.0 -1/4~-2in / +1/4~-1 1/2in TSS062 $1,116.00
Subaru
Impreza (GC6/8) 98-01 8.0 / 6.0 ±0~-2in / -1/2~-2in TSS031 $1,488.00
Impreza WRX (GDA) 02- 8.0 / 6.0 -3/4~-2 3/4in / +1/4~-1 3/4in TSS045 $1,581.00
Impreza WRX STI  (GDB) 04- 8.0 / 6.0 -3/4~-2 3/4in / +1/4~-1 3/4in TSS045 $1,581.00
Toyota
Celica (ZZT231) 00- 6.0 / 6.0 -1/4~-2 1/4in / -1/4~-3in TSS036 $1,348.50
MR-2 (SW20) 90-95 4.0 / 6.0 -1/2~-2in / -1/4~-2in TSS019 $1,488.00
MR-2 Spyder (ZZW30) 00- 3.0 / 6.0 ±0~-1 3/4in / +1/4~-1 1/4in TSS039 $1,488.00
Supra (JZA80) 93-98 14.0 / 12.0 +1~-1 3/4in / +1~-1in TSS012 $1,302.00

*Pillow Ball Upper Mount Optional, included on certain applications

*With Helper Springs

Please call for Current Sale Prices!

Upgrade Motoring
19355 Business Center Dr. #5  Northridge, CA  91324
(818) 998-6005   fax: (818) 998-6006  E-mail

© Copyright 2001-05 Upgrade Motoring, All rights reserved